Specimen Preparation

Concrete Cube Moulds

 

 

 

 

 

 

 

 

 

 

 

CON-0810 Cube mould 100 x 100 x 100mm Cast Iron

CON-0815 Cube mould 150 x 150 x 150mm Cast Iron

CON-0820 Cube mould 150 x 150 x 150mm Plastic

CON-0825 Cube mould 200 x 200 x 200mm Cast Iron

These cast iron, hard plastic or steel cube moulds are manufactured in accordance to dimensions and tolerances stated in the related standards. Complying with EN 12390/1, ASTM C39, C192-AASHTO T23, T126.

 

Concrete Beam Moulds

 

 

 

 

 

 

 

 

 

 

 

CON-0830 Steel beam mould 100 x 100 x 400mm

CON-0832 Steel beam mould 100 x 100 x 500mm

CON-0835 Steel beam mould 150 x 150 x 600mm

CON-0838 Steel beam mould 150 x 150 x 750mm

Labs4u steel beam moulds are manufactured in accordance with the sizes and tolerances as defined in EN 12390-1, ASTM C39, C192, AASHTO T23, T126 and designed to be durable, resistant and easy to clean.

PDF Data Sheet: Beam Moulds

 

Concrete Cylinder Moulds

 

 

 

 

 

 

 

 

 

 

 

CON-0842 Cylinder mould 100mm x 200mm, steel

CON-0845 Cylinder mould 150mm x 300mm, steel

CON-0850 Cylinder mould 160mm x 320mm, steel

CON-0843 Cylinder mould 100mm x 200mm, plastic

CON-0846 Cylinder mould 150mm x 300mm, plastic

CON-0851 Cylinder mould 160mm x 320mm, plastic

These steel and hard plastic cylinder moulds are manufactured in accordance to dimensions

and tolerances stated in EN 12390/1, ASTM C39, C192, AASHTO T23, T126. Two part and clamp attached base plate plastic and steel moulds are designed to be durable, resistant and easy to clean.

PDF Data Sheet: Concrete Cylinder Moulds

 

Pan Type Concrete Mixer

 

 

 

 

 

 

 

 

 

 

 

CON-0750 Pan type concrete mixer, 56 litre capacity

The efficient mixing of concrete is essential if quality specimens are to be manufactured. Pan type mixers are suitable for the mixing of small quantities of concrete in the laboratory for making test samples. The mixer is designed to give efficient mixing of both dry and wet materials.

PDF Data Sheet: CON-0750 Pan Type Concrete Mixer

 

Drum Type Concrete Mixer

 

 

 

 

 

 

 

 

 

 

 

CON-0760 Concrete drum mixer

The mixer is used for efficient mixing of concrete, plaster and mosaic, and with a capacity of 125 lt. this lightweight mixer is equipped with rubber wheels which provide high portability.

PDF Data Sheet: CON-0760 Drum Type Mixer

 

Vibrating Tables

 

 

 

 

 

 

 

 

 

 

 

CON–0900 Vibrating Table, 610 x 380mm top

CON–0910 Vibrating Table, 1260 x 620mm top

The Labs4u fixed amplitude vibrating table is a compact unit providing controlled vibratory compaction in the laboratory for cube or cylinder moulds. The vibrating table consists of a vibrating motor, a control unit and a clamping assembly. The table is available in two sizes, 610 x 380mm and 1260 x 620mm and complies with EN 12390–2.

PDF Data Sheet: Vibrating Tables

 

Poker Vibrators


 

 

 

 

 

 

 

 

 

 

CON–0930 Poker Vibrator

CON–0932 Poker Vibrator

CON–0935 Poker Vibrator

The Poker Vibrator is ideal for the internal compaction of concrete specimens and a good alternative to the traditional tamping bar especially when there are large numbers of specimens to be compacted. Shaft length and tip diameter can be selected upon user’s request. Complies with EN 12390–2, ASTM C31, C192, AASHTO T 23, T126.

PDF Data Sheet: Poker Vibrators

 

Large Curing Tank

 

 

 

 

 

 

 

 

 

 

 

CON-0950 Large Curing Tank

This large curing tank is designed for curing concrete cubes and cylinders. The temperature is set and maintained to the selected value by a heater and thermo-regulator between ambient to 40ºC with ±2ºC accuracy. The tank is made from zinc coated sheet steel and supplied complete with base racks and water circulation pump. Complies with EN 12390–2, ASTM C31, C192, C511.

PDF Data Sheet: CON-0950 Large Curing Tank

 

Melting Pot

 

 

 

 

 

 

 

 

 

 

 

CON-1050 Melting Pot, 3 litre capacity

Used for melting the capping compound (sulphur). The apparatus consists of an aluminium container in a lagged steel jacket, a cover and a thermostatic control heating system to keep the temperature constant in the range of 40-300ºC. Complies with EN 12390–3, ASTM C31, C192, C617, AASTHO T23, T126.

PDF Data Sheet: CON-1050 Melting Pot

 

Cylinder Capping Frame

 

 

 

 

 

 

 

 

 

 

 

CON-1054 Cylinder Capping Frame

The capping frame is used to assure end surfaces perpendicular to the axis of the cylinder during capping. The frame comprises two vertical supports mounted on a steel base and is supplied complete with base plates for 75, 100 and 150 mm dia. cylinder specimens. Complies with ASTM C617, EN 12390-3, AASHTO T23.

PDF Data Sheet: CON-1054 Cylinder Capping Frame